Palmer Monicon XL - Active Studio Monitor Controller

Palmer
SKU:
PAL-PMONICONXL
|
UPC:
4049521402883
Availability:
Usually ships in 24 hours
$799.00
Condition:
New
Standard Manufacturer's warranty
Current Stock:
Adding to cart… The item has been added

Palmer Monicon XL - Active Studio Monitor Controller

NO MATTER WHAT, YOUR MIX IS UNDER CONTROL

An absolutely clear-sounding signal is a must in the studio if you want work to go your way. The Palmer MONICON® XL lets you do just this: it makes it possible to configure the sound yourself, to route different sources to different monitors and to regulate the monitoring level so that you can fine-tune everything to your working style. Plus, it also lets you communicate with the musicians when you want. It’s your guarantee for complete control always!

No matter what, your mix is under control

CUSTOMISABLE

COSTOMISABLE

Configure the controller and adjust it to fit how you work.

CORRELATION METER

CORRELATION METER

The correlation meter lets you quickly and easily identify mono compatibility errors in your mix by show you the phase difference between the left and right channels.

SOUND LEVEL METER CALIBRATION

SOUND LEVEL METER CALIBRATION

Calibrate the L/R sound level meter to either +4, +10 or +18 dBu.

OUTPUTS

OUTPUTS

You can connect three monitor pairs and balance the sound level using individual volume controls. In addition, there's a mono-summed full range output for a mono monitor or subwoofer.

Switching between different signal sources and monitors is one olf the ost common tasks in any studio. Ergonomic console design and two clearly structured control levels makes the Palmer MONICON XL the perfect, intuitive nerve centre for all your requirements. Selecting audio sources and loudspeakers is convenient and at the touch of a button.

The Palmer studio monitor controller features three analogue stereo inputs, one S/PDIF input and outputs for three monitor pairs, each with its own volume controller for level calibration. A further mono summed full-range output is also available for connecting either a mono monitor or a subwoofer. An exclusive highlight of the MONICON XL is its correlation meter, which displays the phase difference between a stereo signal's left and right channels. This facilitates the quick and simple discovery of mono-compatibility errors in mixes. The controller is also customisable to your personal work style.

Its fully analogue audio circuit means that the MONICON XL demonstrates absolutely no latency or signal distortion. Additional features that are a must for any studio make the device far more than simply a monitor controller. Two headphone outputs with volume controllers and main cue selector switches, a cue master controller and an on/off talkback microphone with volume control are all also included. As are a mute button and a dim button, with volume control, that instantly reduces the monitor level by a pre-set amount.

  • Latency-free analogue signal path
  • Customisable
  • Level indicator L/R with +4, +10 and +18 dBu calibration options
  • Correlation meter for verifying mono-compatibility
  • Two headphone outputs with volume controllers and main cue selector switches
  • Three analogue inputs, one S/PDIF input
  • Three loudspeaker outputs with volume controllers for level calibration
  • Mono summed output for subwoofer or mono monitor
  • Main and cue direct outputs
Product type:
Other Studio and Recording Equipment
Outputs:
One unbalanced stereo CUE output; One unbalanced stereo MAIN output; Three controllable and balanced stereo outputs; Two stereo headphone outputs (PHONES)
Inputs:
3 + SPDIF
Input connectors:
3.5 mm TRS; 6.3 mm jack; RCA; SPDIF
Input type:
balanced/unbalanced (depending on TS/TRS connection)
Max. input level:
20 dBu
Input impedance:
(balanced) 10.000 Ohm(s); (unbalanced) 5.000 Ohm(s)
Outputs:
7 x stereo
Output connectors:
TRS balanced (1 - 3); TRS unbalanced (CUE, MAIN, headphones 1 & 2)
Output impedance:
600 Ohm(s)
Frequency response:
12 - 90000 Hz
Total Harmonic Distortion (THD):
0.002 % (BW 20 - 20,000 Hz)
Signal-to-noise ratio (SNR):
102 dB (a-weighted) @ + 4 dBu
Dynamic range (DR AES17):
115 dB
CMRR:
> 55 dB
Max. attenuation:
111 dB (Attenuator + Mute)
Max. attenuation:
86 dB (Attenuator)
Controls:
attenuation; Audio DIM; input selector; mono; mute; output selector; PFL source; Talkback
Housing material:
sheet steel; wood
Cabinet surface:
Powder coated
Width:
254 mm
Height:
84 mm
Depth:
215 mm
Weight:
1.512 kg