Audix ADX-Fireball Dynamic Mic for Harmonica & Beatbox
AudixAudix ADX-Fireball Dynamic Mic for Harmonica & Beatbox
FireBall™ dynamic instrument microphone
Designed for harmonicas (both diatonic and chromatic) and beatbox. Clear, accurate, and capable of handling SPLs in excess of 140 dB without distortion, the FireBall™ is ideally suited for both live stage and studio recording applications.
The FireBall™ microphone has a smooth, uniform frequency response of 50 Hz – 16 kHz, and a Cardioid pickup pattern for isolation and feedback control. It is lightweight, compact, and comfortable to hold. The FireBall™ is manufactured with a precision machined aluminum body, steel mesh grille, and a unique three-stage marbled anodized finish.
Because the FireBall™ Cardioid instrument microphone is a low impedance microphone, when using with a guitar amplifier, a quality, low-high impedance transformer (see T50k) is required.
Designed, machined, assembled, and tested by Audix in the USA.
What's in the box?
- 1x FireBall™ Instrument Microphone
- 1x DCLIP Microphone Clip
- 1x P1 Carrying Pouch
- Transducer Type:
- Dynamic Frequency Response 50 Hz – 16 kHz
- Frequency Response:
- 50 Hz – 16 kHz
- Polar Pattern:
- Cardioid
- Output Impedance:
- 280 ohms
- Sensitivity:
- 1.5 mV / Pa @ 1k
- Capsule Technology:
- VLM Tyle B
- Off-Axis Rejection:
- >23 dB
- Maximum SPL:
- ≥140 dB
- Power Requirements:
- None
- Connector:
- 3-pin XLRm
- Polarity:
- Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish:
- Machined Aluminum / Anodized
- Weight:
- 128 g
- Length:
- 77.5 mm