Audix ADX-ADX20IP Miniature Condenser For Brass & Woodwind
Audix
$479.00
Standard Manufacturer's warranty
Audix ADX-ADX20IP Miniature Condenser For Brass & Woodwind
The ADX20iP miniature condenser microphone is applicable for professional stage and studio applications.
This microphone is primarily used for miking most reed and brass instruments. The ADX20iP has a uniformly controlled Cardioid polar pattern, which provides excellent isolation and feedback control on stage with natural sound reproduction at very close distances.
The ADX20iP condenser instrument microphone is lightweight, compact, and simple to use. Included with the ADX20iP is a gooseneck clip with spring tension for easy mounting to the bell of an instrument.
Designed, machined, assembled, and tested by Audix in the USA.
What's in the box?
- 1x ADX20i Instrument Microphone
- 1x MC20i Microphone Clip
- 1x WS10 External Windscreen
- 1x P1 Carrying Pouch
- 1x APS910 Phantom Power Adapter
- Transducer Type:
- Pre-Polarized Condenser
- Frequency Response:
- 40 Hz – 20 kHz
- Polar Pattern:
- Cardioid
- Output Impedance:
- 250 ohms
- Sensitivity:
- Cardioid – 6 mV / Pa @ 1k Hypercardioid – 5.6 mV / Pa @1k
- Equivalent Noise Level:
- <29 dB (A-weighted)
- Signal to Noise Ratio:
- >65 dB
- Maximum SPL:
- ≥135 dB
- Power Requirements:
- 9-52 V phantom
- Connector:
- Shielded 6’ terminating to a miniature 3 pin XLRf
- Polarity:
- Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Materials / Finish:
- Machined Brass Capsule / Black Finish
- Weight:
- 48 g
- Length:
- 29 mm
